Top 10 Camera Suction Mounts
#1

ULANZI SC-02 Suction Mount Magic Arm Bracket for DSLR Cameras Action Camera Video Shooting
Brand: UURig
$35.96
⭐ 4.6
Read more
- ã€Strong Load & Safe Use】 4.5 inch larger suction cup mount, more contact area, stronger adsorption force. Sueesgted to use within 3KG (6.6lbs) Vertical bearing load: 40kg (88.2lbs) Horizontal bearing load: 60kg (132.3lbs)
- ã€Quick Release Suction Mount】 The Vacuum Suction Cup Mount comes with quick release nato clamp mount for quick application and storage. Could be moved and adjusted at will with the NATO rail included. There are spring pins on both sides to prevent accessories from falling off.
- ã€Easy Use & Convenient Storage】Air pump type vacuum suction cup mount, it's easy to operate, Exhaust the internal air by pressing the air pump to create a vacuum inside and avoid falling off. The suciton mount kit is equipped with a pull-out storage bag, it is more convenient to carry around.
- ã€Universal 1/4" Thread 】 ULANZI SC-02 has universal 1/4" thread thread to mount photogrpahy equipment including vlog camera, dslr camera, light, microphone, for action camera or any other accessories with 1/4" hole. Please Note: The action camera adapter (if need like for Action Camera) is not included. Could be installed with Glass door / window, Car interior windshield / exterior windscreen door. Compatibile with various scenes application.
- ã€What's Included】4.5inch suction mount*1; ballhead arm mount*1; NATO rail*1; 1/4" screw*2; Hex wrench*1; Storage bag*1
Check Price
#2

PellKing Suction Car Mount for Insta360 x5,x4, x3, x2, x,One RS,R Compatible with GoPro Max Camera 5 in 1 Suction Mount Kit for Action Cameras (Includes 44.9-inch Selfie Stick)
Brand: PellKing
$99.99
⭐ 4.7
Read more
- APPLICATION: This camera mount kit is designed for cars, using this kit, you can realize the low altitude shooting effect without drone.
- MULTIPLE ANGLE ADJUSTMENT: This suction cup mount allows the selfie stick to shoot vertically and tilt for a wider range of shots than other kits sold in the market.
- DUAL SAFETY: There are 5 suction cups. The suction cups are 3.3 inches in diameter for more suction power.
- Multi-SCENARIO USE:the kit includes a clamping bracket with a double-sleeve arm, a design that reduces wobbling and bending of the selfie stick. The camera clamp can also be used on bicycle /motorcycle handlebars and inside the car.
- INVISIBLE SELFIE STICK: Includes an adjustable selfie stick with a length of 28-114cm, which is invisible in the insta360 x5/x4/ x3/x2/x/RS/R/GoPro MAX panoramic sports camera shooting state.
Check Price
#3

ThtRht 2 Pack Dash Cam Suction Cup Mount with 1/4 Screw Thread Windshield Camera Holder Stand for Car Dashcam GPS Driving DVR Action Camcorder Phone Bracket Video Recorder
Brand: ThtRht
$8.97
⭐ 4.7
Read more
- Package: 2x Car Suction Cup Bracket
- Comes with a Suction Cup Enables Your Camera/Gps to Adhere in Any Slick Flat Surface,Especially Glass
- It's Designed to Secure the Dash Cam and Maintain Adhesion on Windshield During High Impact.It Can Be Attached Securely to Your Car Windows, Dashboard Other Non-porous Surfaces, Easy to Use.
- You Can Freely Adjust the Camera to Your Favorite Position.
- Mini Portable, Max Load 3kg
Check Price
#4

SMALLRIG Double-Layer Suction Cup Mount for GoPro Hero 11/10 / 9, for DJI Osmo Action/Procket, for Insta360 X3, Double Ball Head Support 360° Rotation, Mount on Car Windshield or Window SC-1K - 4193
Brand: SMALLRIG
$23.99
⭐ 4.8
Read more
- Wide Compatibility: This suction cup kit is designed for motion photography, coming with a 1/4'' screw and action camera mount that are compatible with GoPro 11/ 10/ 9/ 8/7, for Insta360 ONE R/ONE X/ONE X2/X3, for DJI Osmo Action/Action2, Osmo Pocket/Pocket 2, and other action cameras
- Strong Suction & Solid: The patent double-layer suction cup provides stronger suction and long-lasting adsorption. It is made of durable aluminum alloy, which is more sturdy and not easy to break. Note: When using it in a car, please attach a lanyard for further security and drive the car at less than 60km/h
- Quick Installation: One-button press design for quick removal and installation of the suction cup to improve shooting efficiency. Foldable and easy to carry. Besides, a special suction cup dust cover is included to prevent dust
- 360° Adjustment: The adjustable dual ball head supports 360° rotation, so that you can shoot in different scenarios at any angle as needed.The suction cup mount is only suitable for non-impact activities. Please do not use it for surfing, skiing, or other impact sports
- Load Capacity: Dynamic load for 0.3kg (10.6oz) and static load for 1kg (35.3oz). Better suitable for dry, smooth, and clean surfaces like car windshield or window, tile place, desktop,and more. Do not mount on rough surfaces
Check Price
#5

K&F Concept 4.5" Suction Cup Camera Mount with Magic Arm, ARRI Style 1/4" 3/8" Threads, Quick Release Car Mount Compatible with Gopro DJI Insta360 for DSLR Action Camera Phone Video Shooting
Brand: K&F Concept
$39.99
⭐ 4.4
Read more
- [Superior Suction Power] - K&F Concept Powerful Suction Cup Equipped with 4.5-inch (115mm) rubber large suction cups, it can be firmly adsorbed on smooth, flat, non-porous surfaces, such as car glass, hood, body sides, tiles, wooden table tops, etc., providing stable support for shooting and dramatically improving shooting flexibility. Recommended load-bearing equipment in motion: 3kg, suction cup horizontal suction force up to 60kg, vertical suction force 40kg.
- [Multiple Interfaces & Compatibility] - The Suction Cup Camera Mount is equipped with multiple 1/4“ and 3/8†screw interfaces, supporting external pea pods, magic arms and other accessories. The top of the pea pod adopts 1/4†screw + ARRI telescopic positioning pin design to meet the needs of multi-scene shooting. Flexible to install sports cameras (compatible with GoPro, DJI, Insta360, etc.), cameras, cell phones, fill light and other devices. *Note please use it at a safe speed to prevent accidental fall.
- [360°Universal Adjustment] - The external pea pod adopts double ball head design, supports 360° rotational adjustment, one word adjustment latch easily adjusts the shooting angle, unlocking more beautiful videos. ARRI positioning pin design prevents the device from deflecting and ensures stable shooting, while facilitating quick adjustments to save time.
- [Easy Installation Quick Release] - The pump-activated powerful suction cup mount can be tightly attached to the object by pressing the suction pump, and when the suction cup is removed, you only need to gently pinch the two sides to remove it quickly. The vacuum suction cup has a warning line, press the pump until the warning line disappears to use. You can monitor the suction status at any time during use, if the warning line is exposed, just press again to enhance the suction. It is recommended to check every 4 hours to ensure solid adsorption.
- [Dustproof Protection for Longevity​] - The suction cup camera mount made of high quality aluminum. Includes suction cup*1, magic arm*1, phone holder*1, action camera adapter*1, dust cover*1. The dust cover protects the suction cup when not in use, keeps it clean and ensures that the suction power is not compromised the next time it is used.
Check Price
#6

Neewer 3" Suction Cup Camera Mount Bracket with Ball Head Magic Arm, 1/4" ARRI Holes, Quick Release Car Mount with Phone Holder & Action Cam Adapter Compatible with iPhone DJI Insta360, CA104
Brand: NEEWER
$32.99
⭐ 4.1
Read more
- ã€Suction Cup Mount Kit】 This 3" pump activated vacuum suction cup firmly sticks to most surfaces, and rotates your action camera (adapter included) or smartphone (phone holder included) at 360° using the dual ball head magic arm, compatible with Hero 13 12 11 10 9 8 7 Black go pro max DJI OSMO Action 5 Pro 4 3 2 Insta360 X5 X4 X3 X2 insta 360 go 3 ace pro, compatible with iPhone 16 15 Pro Plus Max Samsung Galaxy Google Pixel, etc. Note to use at speeds below 80 km/h to prevent accidental drops
- ã€Excellent Load Capacity】 This camera suction mount stand compatible with gopro insta360 action cameras is applicable to smooth, flat, and nonporous surfaces, including glass window, car windshield inside outside dash, ceramic tile, wood desk, metal board, and more. With a 3" (76mm) diameter, it offers a maximum load of 4.4lb (2kg) at speeds up to 80km/h (50mph) in motion. For stationary, it offers 44lb (20kg) bearing in horizontal orientations and 26.5lb (12kg) bearing in vertical orientations
- ã€Quick Release & Effortless Setup】 Simply press for quick, powerful grips on the surfaces, aided by the indicator lines, and swift release with a simple upward pull of two rubber grips on the suction cup. Note: Make sure that the white line stays inside the air pump when attaching the suction cup for sufficient suction force
- ã€Multiple Mounting Options】 1/4" and 3/8" female threads with ARRI locating holes on the camera suction cup bracket can connect to a magic arm, boom arm, super clamp, extension pole, and other accessories (only the magic arm is included), compatible with Ulanzi compatible with Smallrig accessories. The top 1/4" screws on the articulating magic arm are for mirrorless vlog cameras, camcorders, action camera adapters, phone holders, and more (the action camera adapter and phone holder are included)
- ã€Premium Construction】 Crafted with rigid and corrosion resistant aluminum alloy, the suction cup camera mount can withstand uncertain outdoor environments. The silicone rubber cup is easy to clean with water
Check Price
#7

Camera Suction Cup Mount for Action Cameras - ULANZI SC-02 4.5in Pump-actived Vacuum Suction Mount w Quick Release NATO Magic Arm Car Boat Windshield Window Mount Compatible with Action Cameras
Brand: ULANZI Select
$37.99
⭐ 4.8
Read more
- ã€New Technology - Pump-actived】 With the start of the manual air pump, the gas inside the cavity is continuously pumped out, and the air pressure then drops to a negative pressure state. The vacuum suction cup will be pressed on the surface of the object under the action of external atmospheric pressure, thus realizing vacuum adsorption
- ã€High Quality for Safe Use】Made of high quality aluminum alloy and premium rubber, stick the surface tightly, load-bearing capacity up to 3KG; Vertical suction: 40kg Horizontal suction: 60kg
- ã€NATO Rail Magic Arm】NATO camera mount able to quick install on and release from the suction base; durable metal material give camera strong supper; dual 360°ball head allows to adjust the angle at will; includes a action cam adapter, enable to work with gopro/dji action 3
- ã€Rich Expansion for Multi Mounting】 Equipped with multiple 1/4'', 3/8'' threads and adapters to achieve easy expansion, able to connect ball head and magic arm
- ã€Wide Application】 Attached to any smooth surfaces firmly with super suction power, such as boat, metal/ceramic surfaces, car windscreen/windshield, plate glass door, car door, car hood, car top roof, truck lid,car window etc
- ã€Packing List】4.5inch Suction Mount*1; Ball Head Magic Arm*1; NATO Rail*1; Action Cameras Adapter*1; 1/4" Screw*2; Hex Wrench*1; Storage Bag*1
- NOTE: The action camera adapter is packed with the paper box, but not in the paper box, please check the package clearly. IF THERE GO PRO ADAPTER MISSING, PLEASE CONTACT US, WE SEND YOU ANOTHER ONE
Check Price
#8

NEEWER Triple Suction Cup Car Mount Kit with 2in1 Extension Pole/Selfie Stick, Quick Release Outside Windshield Magic Arm Camera Mount with Action Camera Adapter Compatible with GoPro Insta360, CA065
Brand: NEEWER
$89.99
⭐ 4.1
Read more
- ã€Triple Suction Cup Car Mount Kit】 Capture immersive POV (point of view) footage from unique driving angles like your engine hood, windshield inside/outside, car dash, or car side. The suction cup camera mount stand holder securely attaches your action camera with three powerful suction cups, and enables flexible positioning with extension poles and a ball head magic arm for video recording, with a safety lanyard for added safety. Note to use at speeds below 80 km/h to prevent accidental drops
- ã€Quick Release Powerful Suction Cups】 Featuring three suction cups with a diameter of 3" (74mm), this camera car mount creates a sturdy triangular structure for reliable weight bearing. Presses for quick, powerful grips on the surfaces, aided by the indicator lines, and swift release with a simple upward pull of two buttons on each cup. The dual suction cup mount is connected by a U shaped bracket, allowing both combined and standalone use, catering to diverse shooting needs
- ã€360° Dual Ball Head Flexible Angles】 The two 360° rotatable ball heads on the magic arm, with the option to attach to the top U bracket via a 1/4" thread, can be adjusted to any angle for optimal shooting flexibility. The single suction cup mount enables 180° front and back adjustments with the thumb screw
- ã€Versatile Telescopic Extension Pole/Selfie Stick】 Extendable from 12.6"/32cm to 43.3"/110cm, this four section telescopic pole connects to the single suction cup mount via a 1/4" screw, and is secured with a 0.95"/24mm max adjustable clamp on the magic arm for stability. Doubles as a versatile selfie stick.Max. Load 11lb/5kg.When used with a selfie stick, the weight capacity is 2.2lb/1kg when the stick is extended to its longest length . A 2.75"/7cm short extension pole enhances versatility
- ã€For Various Devices】 The single suction cup mount, telescopic pole, and short extension pole all have a 1/4"" screw for mounting a mirrorless vlog camera, camcorder, phone holder, action camera adapter, etc (Only includes an action camera adapter). The mount adapter accessory is compatible with DJI OSMO Action 5 Pro 4 3 2 compatible with GoPro 13 Hero13 Hero 12 11 10 9 8 7 Black go pro Max compatible with Insta360 X4 X3 X2 insta 360 Ace Pro Go 3 compatible with AKASO Brave 8 7 4, etc.
Check Price
#9

ASOCEA Action Camera Suction Cup Mount Windshield Camera Holder Tripod Adapter with 1/4" Screw Compatible with Gopro Hero 13 12 11 10 9/AKASO EK7000/Brave 4/Dragon Touch/DJI OSMO/Insta360 X3 x2
Brand: ASOCEA
$9.99
⭐ 5
Read more
- Sturdy suction cup camera mount: Extendable height with 360 Degree tilt, turn and rotation offers unlimited shooting possibilities.It comes with an adaptor that can move the camera in variety of angles
- The suction cup mount enables you to lock your go pro camera at the best visual angle and capture your best shots,provides a broad range of motion and stability, you can enjoy the POV filming
- Easy To Install: It can be attached securely to your car windows, dashboard or roof, boat, motorcycle and other non-porous surfaces, easy to use.Attaching to a clean and smooth surface for maximum holding strength
- Universal Camera Windshield mount have a larger diameter so there is a greater suction force to keep your action camera safe. It is durable and compatible with gopro hero 13 12 11 10 9 8 7 6 5 4,Gopro Max,AKASO EK7000,Brave 4,V50 elite,V50X Native,DJI OSMO Action,Insta360 X3 One X2,Dragon Touch,Vemont,REMALI CaptureCam,Jadfezy,Surfola,HLS,COOAU and most of digital camera
- Warm Tips: This suction mount should attaching to a clean and smooth surface for maximum holding strength and a layer of transparent film at the bottom of suction cup, need to tear up before use. (Please avoid to expose it to the sun in high temperature for a long time)
Check Price
#10

NEEWER 6"/15.2cm Camera Suction Cup Mount with Ball Head Magic Arm, Metal Suction Cup Mount on Car Windshield Dash for Camera/Action Camera/Phone Holder, with 1/4" & 3/8" Mounting Holes for ARRI
Brand: NEEWER
$44.99
⭐ 4.2
Read more
- ã€Powerful Suction Cup with Magic Arm】 CA013 accessories kit has a pump activated vacuum suction cup to stick to most surfaces and rotate a mirrorless camera, action camera, and phone 360°. Compatible with GoPro Hero 12 11 10 9 8 7 Black go pro Max Insta360 X4 X3 Go3 insta 360 Ace Pro DJI Osmo Action 4 3 2 Sony Canon Nikon DSLR, compatible with AKASO Brave 4 etc. A magical articulated arm with two swivel 1/4" ball heads mounts your device and provides flexible mounting positions
- ã€Excellent Load Capacity】 Our suction cup mount holder offers a maximum load capacity of 11b (5kg) at speeds of up to 80 km/h (50 mph) in motion. For stationary surfaces, it offers 88 lb (40 kg) bearings in horizontal orientations and 110 lb (50 kg) bearings in vertical alignments. Ideal for using camera or cell phone to take road trip POV video recording
- ã€Suitable for Different Surfaces】 The 6"(15.2cm) enlarged suction cup is applicable to smooth, flat and non porous surfaces, including glass windows, car windshields inside outside, ceramic tiles, metal plates and more. Easy to remove thanks to the rubber handles
- ã€Multiple Attachment Points】 1/4 inch and 3/8 inch internal threaded and locating holes for ARRI standard can safely install a magic arm, boom arm, super clamp, phone holder compatible with iPhone Samsung and other smartphones, action camera adapter and other photography accessories (only the action camera mount adapter and magic arm included)
- ã€Premium Construction】 The suction cup holder made of a rigid and wear resistant aluminum alloy can withstand unsafe outdoor environments. And the silicone rubber bowl can be used for a long time and easy to clean with water
Check Price